Connecting to a Projector on a Different Subnet
32
Making a Profile
Profiles are made by saving search results.
For details on how to edit a previously saved Profile, see the following
section. s p.34
Procedure
A While the projector is displayed on the EasyMP Network
Projection projector selection screen, click "Save in the
profile".
The Save in the profile screen is displayed.
B Enter a Profile name, and then click "Add".
Projector information is registered in the Profile.
If you have previously saved a Profile, you are prompted to confirm
whether or not to overwrite. To save a Profile with a different name,
select Save as. If you have created a folder for a Profile, the follow-
ing screens are displayed. After entering the Profile name and se-
lecting the Save in destination, click Add.
For Windows
To Next Page
Loading...
