Using the Projector on a Network 119
3. Press Enter, or, if you set a Web control password in the
projector’s Network menu, enter your user name and password,
then press
Enter. You see a screen like the following:
4. Select one of the menu options listed on the screen, then change
any of the settings as needed. These settings correspond to those
found in the projector’s menu system.
You cannot change the following settings using a web browser:
■ Pointer Shape, Pattern, or User Button in the Settings
menu
■ User’s Logo, High Altitude Mode, and Language in the
Extended menu
■ Reset All and Reset Lamp Hours in the Reset menu
■ Password protection
To Next Page
Loading...
