13
English
Control Pad
External dimensions and weight
The Control Pad weighs approximately 8.5 ounces (240 g).
Cable routing holes
When routing cables through a wall, use the position ( ) in the following figure as the cable routing hole.
Otherwise, remove the cable cover ( ) and route the cables through the opening. Route the printer cable
along the groove on the back of the Control Pad.
5.4 in (135.9 mm)
0,6 in
(15.47 mm)
0.1 in (3.5 mm)
5.9 in (149 mm)
1.1 in
(29 mm)
4.2 in (107 mm)
4.0 in (104 mm)
1.2 in
(30.9 mm)
6.0 in (153.5 mm)
0.4 in
(11.5 mm)
4.3 in (109 mm)
4.4 in (111 mm)
To Next Page
Loading...
