Epson BrightLink 475Wi - Adjusting the Image; Turn on the Projector; Display the Test Pattern

41
English
6 Adjusting the Image
To ensure the best image quality, follow the steps below to adjust the projected image.
Follow these guidelines for setting up the projector:
• Make sure the image is evenly rectangular, without distortion.
• Make sure the projector is tilted no more than ±3° vertically and horizontally in relation to the projected
image.
A Turn on the projector
B Display the test pattern
1. Press the [Help] button.
Do not make adjustments with the Quick Corner or Keystone functions of the
projector. Doing so may result in a reduction in image quality and pen calibration.
Projector model Remote control column
PowerLite 470/480/570/580
A
BrightLink 475W/480i/485W/575Wi/585Wi/595Wi
BrightLink 575Wi+/585Wi+/595Wi+
PowerLite 475W/485W/575W/585W
BrightLink Pro 1410Wi/1420Wi/1430Wi B
Using the Remote Control
A
Using the Remote Control
B
Using the Control Panel
Using the Remote Control
A
Using the Remote Control
B
Using the Control Panel