Epson BrightLink 475Wi - Install the Batteries; Connect the Projector Cables to the Control Pad

64
C Install the batteries
D Connect the projector cables to the Control Pad
❏ Use two AA manganese or alkaline (recommended) batteries. Do not use any other
type of battery. Rechargable batteries cannot be used.
❏ In order to use the projector to power the Control Pad, connect the optional
Remote control cable set (model ELPKC28, part number V12H005C28) to the
projector’s Remote port and the Control Pad’s Remote port. Do not install
batteries.
Before handling the batteries, read the safety instructions in your projector’s User’s Guide.
Caution
USB cable 1
Remote control cable
USB cable 2
USB cable 3
USB cable 4
USB flash drive