Epson BrightLink 575Wi - Selecting Network Device Display from the Projector Control Toolbar

Controlling the Volume with the Volume Buttons
Starting a PC Free Movie Presentation
Resizing the Image with the Wide and Tele Buttons
Selecting an Image Source
Selecting Network Device Display from the Projector Control Toolbar
If you have connected devices to the projector via a network, you can select to project an image from up
to 50 of those devices using the projector control toolbar. You can select the image source from
computers that are running EasyMP Multi PC Projection, and smartphones or tablets that are running
Epson iProjection.
1. Select the icon on the projector control toolbar.
An image source list appears.
2. Select the Participant List option.
You see a list of available devices.
156