Epson BrightLink Pro 1470Ui - Enabling Duolink in Easy Interactive Tools

39
Enabling DuoLink in Easy Interactive Tools
You need to configure Easy Interactive Tools for use with Duolink.
Check the following on your computer before enabling DuoLink in Easy Interactive Tools:
• You have installed Easy Interactive Tools and the Easy Interactive Driver
• The resolution for the primary display and the secondary display are the same
• The primary display and the secondary display are displayed at the same height
• The secondary display is placed to the right of the primary display
• For Mac, do one of the following:
• macOS 10.12/macOS 10.13: Make sure the System Preferences > Mission Control > Displays
have separate Spaces setting is set to Off.
• OS X: Make sure the System Configuration > Mission Control > Operating space for each
display setting is set to Off.
1. In Easy Interactive Tools, click > on the Command Bar.
You see the Settings screen.
2. On the Enlarge Screen tab, select Use Multi-Projection under Use Screen Settings.