Epson BrightLink Pro 1470Ui - Page 10

9
English
Cable routing holes
When routing cables through a wall, use the position ( ) in the following figure as the cable routing hole.
Otherwise, remove the cable cover ( ) and route the cables through the opening. Route the printer cable
along the groove on the back of the Control Pad.
Pen stand external dimensions and weight
The pen stand weighs approximately 3.3 ounces (93 g).
4.0 in (101.9 mm)
1.7 in
(44.4 mm)
1.4 in
(35.5 mm)
2.8 in (70 mm)
1.4 in
(36 mm)
3.9 in (99.9 mm)
1.1 in
(28.8 mm)
1.1 in
(28.8 mm)