25
English
16. Trace the dots with your finger as shown. When angle adjustment is performed correctly, the traced
dots disappear.
When all of the dots have disappeared, press the button on the remote control and then go to
step 18.
If any dots remain (as shown below), do the following:
• Remove any obstacles from around the projected screen. When you are finished, press the or
button on the remote control and repeat step 12.
• If the dots still remain after removing obstacles, select Additional Adjustments and follow the
instructions.
• If the dots still remain or there are obstacles that cannot be removed, such as whiteboard trays or
frames, go to step 17.
Finger touch operations may not function correctly if you are wearing bandages,
artificial nails, nail polish, or anything else that may obstruct your fingers.
To Next Page
Loading...
