Epson CO-FH01 - Connecting to an iPad;iPhone; Connecting to External USB Devices; USB Device Projection; Connecting to a USB Device

Projector Connections
24
a
• If the projector does not project any images, do one of the following:
• Windows: Click All Programs or Start > EPSON Projector >
Epson USB Display Ver.x.xx.
• Mac: Double-click the USB Display icon in the Application folder.
• When you finish projection, do one of the following:
• Windows: Disconnect the USB cable. You do not need to operate
Safely Remove Hardware.
• Mac: Select Disconnect from the USB Display icon menu on the
menu bar or Dock, and then disconnect the USB cable.
gg Related Links
• "USB Display System Requirements" p.125
Connecting to an iPad/iPhone
You can connect your iPad/iPhone to project videos. To connect your device
to the projector's HDMI port, use a commercially available cable such as an
HDMI conversion adapter.
Connecting to External USB Devices
Follow the instructions in these sections to connect external USB devices to
the projector.
gg Related Links
• "USB Device Projection" p.24
• "Connecting to a USB Device" p.24
• "Disconnecting a USB Device" p.25
USB Device Projection
You can project images and other content without using a computer or video
device by connecting any of these devices to your projector:
• USB flash drive
• Digital camera or smartphone
• USB hard drive
a
• Digital cameras or smartphones must be USB-mounted devices, not
TWAIN-compliant devices, and must be USB Mass Storage Class-
compliant.
• USB hard drives must meet these requirements:
• USB Mass Storage Class-compliant (not all USB Mass Storage
Class devices are supported)
• Formatted in FAT16/32
• Self-powered by their own AC power supplies (bus-powered hard
drives are not recommended)
• Avoid using hard drives with multiple partitions
gg Related Links
• "Projecting a PC Free Presentation" p.54
Connecting to a USB Device
You can connect your USB device to the projector's USB-A port and use it to
project images and other content.
a
If your USB device came with a power adapter, plug the device into an
electrical outlet.
b
Connect the USB cable or USB flash drive to the projector's USB-A port
as shown.