Epson CO-FH01 - Adjusting the Image Position Using Image Shift

Adjusting the Image Position Using Image Shift
42
You can use the Image Shift feature to adjust the image position without
moving the projector.
a
This feature is not available if Zoom is set to the widest setting.
s Settings > Installation > Zoom
a
Turn on the projector and display an image.
b
Press the button on the remote control.
c
Select the Settings menu and press [Enter].
d
Select Installation > Image Shift and press [Enter].
e
Use the arrow buttons to adjust the image position.
a
You can shift the image diagonally by pressing any pair of
adjacent arrow buttons on the remote control.
f
Press the button to close the adjustment screen.
a
The Image Shift setting is retained even if the projector is turned off.
You need to re-adjust the position if you change the installation
location or angle of the projector.