Epson CO-FH01 - Setting Up Wireless Network Security; Using a QR Code to Connect a Mobile Device

Wireless Network Connection
52
Setting Up Wireless Network Security
You can set up security for your projector to use on a wireless network. Set up
one of the following security options to match the settings used on your
network:
• WPA2-PSK security *
• WPA3-PSK security **
• WPA2/WPA3-PSK security **
* Available only for the Quick connection mode.
** Available only for the Advanced connection mode.
a
Contact your network administrator for guidance on entering the
correct information.
a
Press the button, select the Network menu, and press [Enter].
b
Select Network Configuration and press [Enter].
c
Select the Wireless LAN menu and press [Enter].
d
Select the Security setting and press [Enter].
e
Select the security settings to match your network settings.
• WPA2-PSK
• WPA3-PSK
• WPA2/WPA3-PSK
f
Select Passphrase, press [Enter], and enter a passphrase from 8 to 63
characters long. To enter more than 32 characters, use your Web
browser.
g
Select Complete and follow the on-screen instructions to save your
settings and exit the menus.
Using a QR Code to Connect a Mobile Device
After selecting the wireless network settings for your projector, you can
display a QR code on the screen and use it to connect a mobile device using
the Epson iProjection (iOS/Android) app.