43
Adjusting the Image Position Using Image Shift
You can use the Image Shift feature to adjust the image position without moving the projector.
Note: This feature is not available if the digital zoom is set to the widest setting.
1. Turn on the projector and display an image.
2. Press the menu button.
3. Select Settings > Installation > Image Shift to display the Image Shift screen.
4. Use the arrow buttons on the remote control to adjust the image position.
Note: You can shift the image diagonally by pressing any pair of adjacent arrow buttons on the
remote control.
5. Press return to close the Image Shift screen.
Note: The Image Shift setting is retained even if the projector is turned off; however, you need to
readjust the image position if you change the projector's location or angle.
Parent topic: Using Basic Projector Features
Related references
Projector Feature Settings - Settings Menu
To Next Page
Loading...
