Epson CO-FH02 - Image Aspect Ratio; Changing the Image Aspect Ratio; Available Image Aspect Ratios

44
Image Aspect Ratio
The projector can display images in different width-to-height ratios called aspect ratios. Normally the
input signal from your video source determines the image's aspect ratio setting. However, for certain
images you can change the aspect ratio to fit your screen.
If you always want to use a particular aspect ratio for a certain video input source, you can select it using
the projector's menus.
Changing the Image Aspect Ratio
Available Image Aspect Ratios
Parent topic: Using Basic Projector Features
Changing the Image Aspect Ratio
1. Turn on the projector and switch to the image source you want to use.
2. Press the menu button on the projector remote control.
3. Select the Image menu and press Enter.
4. Select Aspect and press Enter.
5. Select the aspect ratio you want to use for your input signal and press Enter.
6. Press the menu button or the return button to exit the menus.
Parent topic: Image Aspect Ratio
Related references
Image Quality Settings - Image Menu
Available Image Aspect Ratios
You can select the following image aspect ratio settings, depending on the input signal from your image
source.
Note: Using the aspect ratio function to reduce, enlarge, or split the projected image for commercial
purposes or for public viewing may infringe upon the rights of the copyright holder of that image based
on copyright law.
Aspect ratio setting Description
Auto Automatically sets the aspect ratio according to the input signal.