Epson CO-FH02 - Correcting Image Shape with Quick Corner

47
4. Press the return button when you are finished.
After correction, your image is slightly smaller.
Parent topic: Image Shape
Related references
Projector Feature Settings - Settings Menu
Correcting Image Shape with Quick Corner
You can use the projector's Quick Corner setting to correct the shape and size of an image that is
unevenly rectangular on all sides.
1. Turn on the projector and display an image.
2. Press the menu button.
3. Select the Settings > Installation menu and press Enter.
4. Select the Keystone setting and press Enter.
5. Select the Quick Corner setting and press Enter.
Note: You may see a confirmation screen. Select Yes and press Enter again.
Note: You can also press the keystone button on the remote control to display the Keystone
adjustment screen.
You see the Quick Corner adjustment screen: