48
6. Use the arrow buttons on the remote control to select the corner of the image you want to adjust.
Then press Enter.
Note: To reset your adjustments, press and hold the return button for at least 2 seconds to
display a reset screen. Then select Yes.
7. Press the arrow buttons to adjust the image shape as necessary. Press Enter to return to the area
selection screen.
Note: If one of the directional arrows on the screen turns gray, you cannot adjust the shape any
further in that direction.
8. When you are finished, press the return button.
Parent topic: Image Shape
Related references
Projector Feature Settings - Settings Menu
Focusing the Image Using the Focus Lever
You can adjust the sharpness of the projected image using the focus lever on the projector.
1. Turn on the projector and display an image.
2. Move the lever left or right to adjust the focus.
To Next Page
Loading...
