Epson CO-FH02 - Projector Information Display - Info Menu

75
Options Description
Advanced Log Save Destination: sets the location where the
projector saves error and operation log files
Batch Setup Range: select to copy the projector menu
settings using the batch setup feature
Parent topic: Adjusting the Menu Settings
Related tasks
Resizing the Image Using Zoom
Correcting Image Shape with H/V Keystone
Correcting Image Shape with Quick Corner
Adjusting the Image Position Using Image Shift
Changing the Projection Mode Using the Menus
Displaying a Test Pattern
Saving a User's Logo Image to Display
Shutting Off the Picture and Sound Temporarily
Selecting the Language for the Projector Menus
Operating Connected Devices Using the HDMI Link Features
Projector Information Display - Info Menu
You can display information about the projector and input sources by viewing the Info menu. However,
you cannot change any settings in the menu.
Select Projector Info to display the settings described below. Select Version to display the projector's
firmware version.
Information item Description
Lamp Hours Displays the number of hours the projector has been used in High
and Low (Eco) modes since it was turned on
Source Displays the name of the port to which the current input source is
connected
Input Signal Displays the input signal setting of the current input source
Resolution Displays the resolution of the current input source