Epson CO-FH02 - Operation & Connectivity Issues

84
Status light Status and solution
Orange Projector is too hot and has turned off.
• Let the projector cool down for at least five minutes
• Make sure that the vents and air filter are not clogged with dust or
obstructed by nearby objects.
• Clean or replace the air filter.
• Make sure the environmental temperature is not too hot.
• If the problem persists, unplug the projector and contact Epson for
help.
Flashing orange One of the following has occurred:
• The lamp has a problem
• A fan or sensor has a problem
• An internal projector error has occurred.
• Power error (Ballast)
Turn the projector off, unplug it, and contact Epson for help.
Note: If the light displays a pattern not listed in the tables above, turn the projector off, unplug it, and
contact Epson for help.
Parent topic: Solving Problems
Related references
Projector Environmental Specifications
Where to Get Help (U.S. and Canada)
Where to Get Help (Latin America)
Related tasks
Cleaning the Air Vents
Solving Projector or Remote Control Operation Problems
Check the solutions in these sections if you have problems operating the projector or remote control.
Note: For Android TV support, visit https://support.google.com/androidtv/.