Epson CO-FH02 - Solutions When Only a Partial Image Appears

90
• Adjust the Sharpness setting to improve image quality.
• If you are projecting from a computer, use a lower resolution or adjust the computer's resolution to
match the projector's native resolution, if possible.
Parent topic: Solving Image or Sound Problems
Related references
Projection Distance
Image Quality Settings - Image Menu
Supported Video Display Formats
Related tasks
Adjusting Picture Quality in Detail
Correcting Image Shape with H/V Keystone
Correcting Image Shape with Quick Corner
Solutions When Only a Partial Image Appears
If only a partial computer image appears, try the following solutions:
• Select Image > Aspect Ratio and set it to Auto.
• If you zoomed into or out of the image using the and buttons, press the return button until
the projector returns to a full display.
• Check your computer display settings to disable dual display and set the resolution within the
projector's limits. (See your computer manual for details.)
• Check the resolution assigned to your presentation files to see if they are created for a different
resolution than you are projecting in. (See your software help for details.)
• Make sure you selected the correct Projection setting in the Installation menu.
Parent topic: Solving Image or Sound Problems
Related references
Supported Video Display Formats
Projector Reset Options - Reset Menu
Related tasks
Changing the Image Aspect Ratio