Epson CO-W01 - Adjusting Projector Features; Operating Connected Devices Using the HDMI Link Features

69
Adjusting Projector Features
Follow the instructions in these sections to use your projector's feature adjustments.
Operating Connected Devices Using the HDMI Link Features
Projecting a PC Free Presentation
Shutting Off the Picture and Sound Temporarily
Zooming Into and Out of Images
Projector Security Features
Copying Menu Settings Between Projectors
Operating Connected Devices Using the HDMI Link Features
You can use the projector remote control to control certain features of devices connected to the
projector's HDMI port.
Note: The connected device and HDMI cable must meet the HDMI CEC standard. The device must also
be configured; see the documentation that came with the device. All devices or functions may not
operate properly.
1. Press the menu button on the projector remote control.
2. Press the arrow buttons to select the Settings menu and press Enter.
3. Select the Operation setting and press Enter.
4. Select the HDMI Link setting and press Enter.
5. Select the HDMI Link setting again and press Enter. Then select On and press the return button.
6. Select the Device Connections setting and press Enter.