Epson DFX-9000 - Error and Warning Messages

Epson DFX 9000 Revision B
Troubleshooting Error and warning messages 101
3.2 Error and warning messages
Table 3-1. List of General Error
Beeper
sounds
(see
below)
LCD Message
LED
Status Remedy
Pause
Paper
Out
Tear
Off
Top
of
Form
Front Rear
–
Print head hot
Please wait
Blink - - - - - Head hot warning. The
temperature of the head
thermistor is above the allowed
limit.
Wait for the temperature of the head
thermistor to fall below the upper
limit.
• • •
Error:
Switching not
completed
On - - - - - The printer fails to completely
change the paper path.
Tear off the paper at the top cover,
and press the Pause or Front/Rear
button.
• • •
Error:
No paper
loaded
On On - - - - Paper out error - loading.
Continuous paper is not fed to
the standby position.
Tear off the page at the perforation;
then press the LF/FF Load button.
The printer feeds the paper to the
standby position.
• • •
Error:
Paper out
On On - - - - Paper out error - No paper is
loaded on the selected tractor.
Load paper on the selected tractor, or
select a different tractor by pressing
the Front/Rear button.
Remove your paper and reload it
correctly.
• • •
Error:
Ribbon out
On - - - - - Ink ribbon out error: The ribbon
is not installed.
Install or reinstall the ribbon
cartridge, and press the Pause
button.
• • •
Error:
Ribbon jam
On - - - - - Ribbon jam error: The ribbon
has jammed.
Remove and re-install, or replace, the
ribbon cartridge.
• • •
Error:
Paper jam
On Blink - - - - Paper jam error: Paper is
jammed in the printer.
Clear the paper jam.