Epson DFX-9000 - Main Unit

Epson DFX-9000 Revision B
Maintenance Lubrication 260
6.2.2.1 Main unit
Shafts, bearings and OC cam
Figure 6-1. Lubrication Point 1
Lubrication Points
Oil
Type
Amount Remarks
(1) Center bore surfaces
and shaft of the
Bearing FL/FR
G-31 Apply a light
coating of
lubricant to the
surfaces
Apply to the
same parts on
Side Frame R
(2) Center bore and shaft
of the Bearing RL/RR
G-31 Apply a light
coating of
lubricant to the
surfaces
Apply to the
same parts on
Side Frame R
(3) Center bore of the OC
bearings L/R and the
OC shaft
G-31 Apply a light
coating of
lubricant to the
surfaces
Apply to the
same parts on
Side Frame R
(4) Center bore of the
collar and Nip roller
shaft R
G-31 Apply a light
coating of
lubricant to the
surfaces
Apply to the
same parts on
Side Frame R
(5) Cam and center bore
of the OC cam
G-31 Apply a light
coating of
lubricant to the
surfaces
Apply to the
same parts on
Side Frame R
2mm
or more
4.5mm
or more
(5)
Bearing FL/FR
(1) (1)
(4)
Collar
(5)
Bearing RL/RR
(2)
(3) (3)
(3) (3)
OC cam
OC Bearing L
OC Bearing R