Epson DFX-9000 - Page 268

Epson DFX-9000 Revision B
Maintenance Lubrication 261
Gears and slide cams
Figure 6-2. Lubrication Point 2
Lubrication Points
Oil
Type
Amount Remarks
(1) Center Bore of the Shift
gear, the spring, and the
teeth and side surfaces of
the Shift gear
G-31 Apply a light
coating of
lubricant to the
surfaces
(2) Center bore of the HCPP
slide cam on the Side
Frame Left, Shift gear,
and the shaft
G-31 Apply a light
coating of
lubricant to the
surfaces
Slide cam
(3) Center bore of the OC
slide cam, the bearings,
and the collar
G-31 Apply a light
coating of
lubricant to the
surfaces
Apply to the
same parts
on Side
Frame R
(4) Center bore of the Shift
gear, and the shaft
G-31 Apply a light
coating of
lubricant to the
surfaces
Shift gear
(1)
(1)
(4)
(2)
(3)
(3)
(2)
(2)
(2)
OC slide cam L/R
HCPP slide cam