Epson DFX-9000 - Page 43

Epson DFX-9000 Revision B
Product Description Basic specifications 36
The following information is added only when the ST command (06h) is
sent with 02h or 03h.
Reply for OPCMD 0Fh (Sends ASCII Message)
ASCII Message:
“TOPB”
“ENDB”
Background Job Command Count 1 & 2 and Message are different
depending on the BGJC.
Simplified Serial Interface Card
The bit rates (bps) available with the Simplified Serial I/F Card:
 19200
 9600
 4800
 2400
 1200
 600
 300
Table 1-29. Supplemental printer information returned for
06h with 02h/03h.
Printer’s information
“ST:”<status code>“;”
[“ER:”<error code>“;”]
[“TP:”<self print code>“;”]
[“PP:”<paper path>“;”]
[“CD:”<characteristic status codes>“;”]
[“IG:”<nn1><nn2><nn3>[“,”... <nnx1><nnx2><nnx3>]“;”]
[“TEC:”<ii1>“;”]
FF
Table 1-30. Background job commands (BGJC)
BGJC
number
Command Response
0x00 Get device ID Device ID & Normal
response
0x01 Get all status Printer Status &
Normal response
0x03 Get specified
EEPROM value
EEPROM value &
Normal response
0x09 Get Network
Settings
Normal response