-7
R4C4600
html.bk Rev.C
APSPE.FM A5 size
7/24/01
R
Proof Sign-off:
ABE Y. Azuma, Nagasawa
Takahashi
ABE S.Halvorson
Printer Specifications
Mechanical
Printing method: 24-pin impact dot matrix
Printing speed: High speed draft 550 cps at 10 cpi
Draft 495 cps at 10 cpi
(594 cps at 12 cpi maximum)
Letter quality 165 cps at 10 cpi
Printing direction: Bidirectional logic seeking for text and graphics
printing. Unidirectional text or graphics printing
can be selected using software commands.
Line spacing: 1/6-inch or programmable in 1/360-inch
increments
Printable columns: 136 columns (at 10 cpi)
Resolution: Maximum 360 × 180 dpi (letter-quality mode)
Paper feed methods: Friction (front)
Push tractor (rear)
Cut-sheet feeder (optional)
Automatic sheet alignment unit (optional)
Paper feed speed: Continuous 8 inches/second
Intermittent 37 msec/line at 1/6-inch
line spacing
Paper capacity: optional cut-sheet feeder
up to 200 sheets of 82 g/m² (22 lb) paper
(A3 size: up to 130 sheets of 82 g/m² (22 lb)
paper)
To Next Page
Loading...
