Epson DLQ-3500 - Using the EPSON Status Monitor 3 Utility

-13
R4C4600
html.bk Rev.C
SOFT.FM A5 size
7/24/01
R
Proof Sign-off:
ABE Y. Azuma, Nagasawa
Takahashi
ABE S.Halvorson
Monitoring settings
Using the EPSON Status Monitor 3 Utility
The EPSON Status Monitor 3 utility that comes with your printer
is available for WindowsMe, 98, 95, 2000 or NT4.0. It allows you
to monitor your printer’s status, alerts you when printer errors
occur, and provides troubleshooting instructions when needed.
The EPSON Status Monitor 3 utility is available only when:
❏ The printer is connected directly to the host computer via the
parallel port [LPT1] or the USB port.
Paper/Output Check the Paper Size, Orientation, and Paper
Source settings you made on the Page Setup menu
and change them if necessary. Select the setting
and then choose an option from the Change Setting
list box.
Halftone Click this button to set the brightness and
contrast, input the RGB gamma, or make other
settings. The Halftone Color Adjustment dialog
box appears. For details, click the Help button
in this dialog box.
Settings Explanations
EPSON Status
Monitor 3
You can access the EPSON Status Monitor 3 utility
when you click this button. To monitor the
printer, make sure the Monitor the printing
status check box is selected.
Monitoring
Preferences
Click this button to open the Monitoring
Preferences dialog box where you can make
settings for the EPSON Status Monitor 3 utility.
See “Setting up EPSON Status Monitor 3” for more
information.
Settings Explanations