Epson DLQ-3500II - Chapter 8 Product Information; Printer Specifications; Mechanical

Chapter 8
Product Information
Printer Specifications
Mechanical
Printing method: 24-pin impact dot matrix
Printing speed: High speed draft 550 cps at 10 cpi
Draft 550 cps at 10 cpi
(825 cps at 15 cpi maximum)
Letter quality 195 cps at 10 cpi
Printing direction: Bidirectional logic seeking for text and graphics printing. Unidirec‐
tional text or graphics printing can be selected using software com‐
mands.
Line spacing: 1/6 inch or programmable in 1/360 inch increments
Printable columns: 136 columns (at 10 cpi)
Resolution:
Maximum 360 × 180 dpi (letter quality mode)
Paper feed methods: Friction (front)
Push tractor (rear)
Cut-sheet feeder (optional*)
Automatic sheet alignment unit (optional*)
* These options may not be available in some countries.
Paper capacity: optional cut sheet feeder
up to 200 sheets of 82 g/m² (22 lb) paper
(A3 size: up to 130 sheets of 82 g/m² (22 lb) paper)
DLQ-3500II/DLQ-3500IIN User’s Guide
Product Information 122