Menu Options for Network Settings (Available only on Network
compatible models.)
Select the menus on the control panel as described below.
Menu > Network Settings
Note:
Regarding the network settings, see the Network Guide for details.
Print Status Sheet
Prints the current network settings.
Advanced Setup
Device Name
Enter the device name within 2 to 15 characters.
TCP/IP
Enter the addresses for the IP address, Subnet Mask, and Default Gateway automatically or manually.
DNS Server
Enter the Primary DNS Server and Secondary DNS Server addresses automatically or manually.
IPv6 Address
Select Enable when you use IPv6 address.
Link Speed & Duplex
You can select an appropriate Ethernet speed and duplex setting. If you select a setting other than
Auto, make sure the setting corresponds to the settings on the hub you are using.
DLQ-3500II/DLQ-3500IIN User’s Guide
Menu Options for Settings 30
To Next Page
Loading...
