1. At the back of your printer, tear off the last label form that has entered the printer, but do not press
the OK button. See the illustration below.
2. Press the LF/FF button to eject the last label form forward.
!
Caution:
Do not leave labels loaded in the printer between print jobs; they tend to curl and may come off
their backing sheet and jam the printer when you resume printing.
Envelopes
You can print on a variety of envelopes by loading them the same way you load single sheets—from the
sheet guide or with the optional cut sheet feeder or optional automatic sheet alignment unit.
Follow these steps to load envelopes:
!
Caution:
Use envelopes only under normal operating conditions.
1. Make sure that your software settings keep the printing entirely within the printable area. See
“Printable area” on page 134 for more information.
!
Caution:
Printing on the edge of an envelope can damage the print head.
2. Make sure that Manual/CSF is selected as the paper source on the home screen. If not, select it by
pressing the Paper Source button.
3. Select Envelope from the home screen as described below.
DLQ-3500II/DLQ-3500IIN User’s Guide
Paper Handling 49
To Next Page
Loading...
