Epson DM-D110 - Vacuum Fluorescent Display Character - Attaching to the TM-H5000 II;TM-J8000

9
English
5. Connect the cable for the DM-D110 to the DM connector on the IM
series.
Attaching to the TM-H5000II/TM-J8000
The DM-D110 can be attached directly to the TM-H5000II/TM-J8000
printers using the “DM-D pole unit for TM printers (Type B)” (DP-503).
Required items
The following items are used to attach the DM-D110 to the
TM-H5000II/TM-J8000 printers. These items are packed with the
“DM-D pole unit for TM printers (Type B)” (DP-503).
base
fixing screws
support C
support B
(for extension)