33
Chapter 2 Setup
2
Installing to the DP-110
1
Pass the cable for the DM-D110 through the DP-110.
When extending the length of the DP110, attach the extension support (DP-105) to
the DP-110.
2
Insert the tab on the DM-D110 (or the extension support) into the hole on the DP-110
until you feel it click.
Because the illustration used here is for the RS-232/USB model, there are 2 cables. The USB model
and RS-232 model have 1 cable.
When using the extension
support (DP-105)
To Next Page
Loading...
