61
Chapter 2 Setup
2
3
Turn the printer over.
4
When installing the AC adapter to the base of TM-J7700, see the "TM-J7200/TM-
J7700 Technical Reference Guide" for procedures and notes regarding installation.
When installing a customer display to the AC adapter side, do not use the power
source fixing plate and screws included with TM-J7700. A customer display is secured
by using fixing plate A of DP-502 and the included screws. For this reason, do not
install the power source fixing plate or attach the screws.
5
Use two screws to secure fixing plate A to the printer.
When installing a customer display to the TM-J7700 AC adapter side, place fixing
plate A on top of the AC adapter and secure by using the screws included with DP-
502.
Do not use the screws that came with DP-502 for the holes for the screws that came with TM-
J7700. The holes may be widened and screws may not be secured as the specifications of the
screws are different.
To Next Page
Loading...
