Epson DM D110 - Serial (Pass-Through)

77
Chapter 2 Setup
2
Serial (Pass-through)
∗ Not available for the RS-232 model.
• DM-D110
• DM-D210
USB cable
*
• Do not remove the cap (factory default condition)
• Not used (bundle inside DP-110/DP-210)
RS-232 cable • Remove the cap
*
• Attach the ferrite core
*
• Connect to the DM-D connector of DP-110/DP-210
• DP-110
• DP-210
DM-D connector Connect the RS-232 cable of DM-D110/DM-D210
Power supply connector Connect the AC adapter
Extension power cable
connector
Use the extension power cable and connect to the TM printer's
power supply connector
Computer interface connector Use the serial cable and connect to the computer's serial
connector
Printer interface connector Use the serial cable and connect to the TM printer's serial
connector
JP1 Set it to 1-2 (Default setting)
JP2 Set it to 1-2 (Default setting)
TM Printer
JP 1-2
DM-D110/DM-D210
Cap
DP-110/DP-210
USB cable
RS-232 cable
Ferrite core
AC adapter
Computer
Power cord
Serial cable
Serial cable
Extension power cable