Epson DM-D500 - Product Specifications; Specifications

20
Product Specifications
Specifications
Specification overview
Display type Vacuum fluorescent display
Number of dots displayed 256 (W) x 64 (H) dots
Number of characters displayed Maximum 32 columns x 4 lines (when using font A)
Maximum 42 columns x 8 lines (when using font B)
Maximum 16 columns x 4 lines (when using kanji characters)
Maximum 20 columns x 2 lines (when operating in DM-D10x/20x compatible mode)
Display color Green (505 nm)
Brightness Maximum 300 cd/m
2
(adjustable with driver and ESC/POS command)
Character classes Alphanumeric characters: 95 characters
International characters: 37 characters
Graphic characters: 128 characters x 12 pages (including 2 user-defined pages)
Kanji characters (JIS Level 1 and 2, GB2312, KS C5601, BIG5)
Character composition
(device font)
Font A: 8 x 16 dot matrix
Font B: 5 x 7 dot matrix
Kanji: 16 x 16 dot matrix
Character size Font A: 4.4 x 8.8 mm
Font B: 3.3 x 4.4 mm
Kanji: 8.8 x 8.8 mm
Interface Standard Compliant with RS-232C
Connector RJ-45
Expected product lifetime 30,000 hours (Time for the luminance of the vacuum fluorescent display to become
half its initial value. Avoid continuously turning on the same dot for
long periods of time as it may cause luminance degradation.)
Rated voltage DC 11.4 V to 48 V
Power consumption Approximately 6 W
Case Color Epson Cool White
Tilt angle Maximum 48° (4 steps, 5 positions)
Horizontal rotation angle Maximum 90° (45° each to left and right)
Power supply When connected to TM printer: Supplied by the TM printer
When connected to DP-501: Supplied by the PS-180 power supply unit