Epson DM-D500 - Attaching to DP-503 (TM-H5000 II)

46
Attaching to DP-503 (TM-H5000II)
Attach DM-D500 directly to TM-H5000II using DP-503.
Required items
The following items are used to attach the DM-D500 to the TM-H5000II. These items are supplied with DP-
503.
Attaching the customer display
1
Pass the DM-D500 connection cable through support C and insert the customer dis-
play into support C.
When using the extension support B, insert support B into support C all the way in until it clicks.
When connecting or disconnecting a cable, be sure the customer display and system are turned off.
Installation base
unit for TM
Tapping screws
for fixing
(M3
×
10) (3 pcs)
Support B
Support C
When using support B (extension)