17
Adjusting the Projection Screen
Basic Operations
Adjusting the tilt of the projector
Displaying a test pattern
Extend
Extend
Retract
Retract
When an image from the projector that is placed on a flat surface is tilting horizontally ( ), use the
front feet to correct the tilt.
You can use a test pattern to make the first setup such as zoom, focus, and image position using the lens
shift without connecting to any electrical equipment.
If on the remote control is pressed, the test pattern appears.
To stop displaying the test pattern, press again.
Adjusting the tilt of the projector
Displaying a test pattern
To Next Page
Loading...
