39
Configuration Menu Functions
Configuration Menu
"Memory" menu
This retrieves settings previously saved using "Save Memory". p.24
This cannot be selected when nothing is saved at "Save Memory".
This can be used to save "Image" menu settings. p.24
This is used to erase unwanted saved memory. p.25
This can be used to change the names of the memories from "Memory1" to "Memory10". You can
rename so that its settings are easy to recognize. Either of the following two methods can be used to
change a memory name. p.25
• Select a new memory from the list and then rename it.
• Select "Customized" and then enter a desired name.
Load Memory
Save Memory
Erase Memory
Rename Memory (EH-TW4500/TW4400 only)
To Next Page
Loading...
