35
Configuration Menu Functions
Configuration Menu
Sets the signal format in accordance with the video equipment that is connected to the [Video] or [S-
Video] input port. If set to "Auto", the video signal format is set automatically.
If there is a lot of interference in the image, or if a problem such as no image being projected occurs even
though "Auto" has been selected, select the correct signal format manually.
Change this setting depending on the type of signal that is being output from the video equipment that is
connected to the [Component] input port.
If "Auto" is selected, appropriate signal is automatically set. If colors appear unnatural even though
"Auto" is selected, select appropriate signal name in the menu.
This sets the display language for messages and menus.
Adjustment values for the "Settings" menu functions are returned to their default settings, except for the
"High Altitude Mode", "Projection", "Component", and "Language".
Input Signal
Video Signal
Component
Language
Reset
To Next Page
Loading...
