54
Specifications
This product is also designed for IT power distribution system with phase-to-phase voltage 230V.
■ Angle of tilt
If you set the projector higher than 8 º, it could damage the projector and cause an accident.
■ RS-232C cable layout
• Connector shape: D-Sub 9-pin (male)
• Projector input connector: RS-232C
Pixelworks DNX
TM
ICs are used in this Projector.
Product Information
For users in Turkey:
In Conformity with the Turkish EEE Regulation.
Türkiye’deki kullanıcılar için
EEE Yönetmeliğine Uygundur.
<At projector>
(PC serial cable)
<At computer>
Signal Function
GND 5 5 GND
GND Signal wire earth
RD 2 3 TD
TD Transmit data
TD 3 2 RD
RD Receive data
<At projector>
<At computer>
To Next Page
Loading...
