EasyManua.ls Logo

Epson dreamio EMP-TW2000 - Specifications

Epson dreamio EMP-TW2000
59 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
51
Appendix
Specifications
Other detailed spec, please access your location (country/area) from Epson homepage, http://
www.epson.com
This product is also designed for IT power distribution system with phase-to-phase voltage 230V.
Product name
Home Projector EMP-TW2000
Dimensions
406 (W) × 124 (H) × 310 (D) mm (not including feet)
Panel size
0.74 inch wide
Display method
Polysilicon TFT active matrix
Resolution
2,073,600 pixels (1920 (W) × 1080 (H) dots) × 3
Scanning
frequencies
Analogue Pixel clock : 13.5 to 150 MHz
Horizontal : 15 to 80 kHz
Vertical : 24, 50 to 85 Hz
Digital Pixel clock : 13.5 to 150 MHz
Horizontal : 15 to 80 kHz
Vertical : 24, 50 to 85 Hz
Focus adjustment
Manual
Zoom adjustment
Manual (appox. 1 : 2.1)
Lens shift
Manual (Maximums: Approx. 96% vertically, 47% horizontally)
Lamp (light source)
UHE lamp, 170 W, Model No.: ELPLP39
Power supply
100 to 240V AC 50/60Hz 2.7 to 1.2A
Power Consumption
Operating: 245W(100 to 120V area), 240W(220 to 240V area)
Standby: 4.0W(100 to 120V area), 5.0W(220 to 240V area)
Operating altitude
0 to 2286m (0 to 7500ft.)
Operating
temperature
+5 to +35°C (No condensation)
Storage temperature
-10 to +60°C (No condensation)
Mass
Approx. 5.6kg
Ports
Component input 1 RCA pin jack × 3
PC input 1 Mini D-sub 15-pin (female) blue
HDMI1
input 1 HDMI
HDMI2 input 1 HDMI
Video input 1 RCA pin jack
S-Video input 1 Mini DIN 4-pin
RS-232C 1 D-sub 9-pin (male)
Trigger out 1 3.5 mm mini jack
Pixelworks DNX
TM
ICs are used in this Projector.

Table of Contents

Related product manuals