EasyManua.ls Logo

Epson dreamio EMP-TW200H - Specifications

Epson dreamio EMP-TW200H
52 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
43
Appendix
Specifications
* The USB connector is not guaranteed to operate correctly with all USB-compatible devices.
Product name
Home Projector EMP-TW200H
Dimensions
440 (W) × 114 (H) × 320 (D) mm (not including feet)
Panel size
0.7 inches
Display method
Polysilicon TFT active matrix
Resolution
921,600 pixels (1280 (W) × 720 (H) dots) × 3
Scanning frequencies
Analogue Pixel clock :13.5 – 110 MHz
Horizontal :15 – 92 kHz
Vertical :50 – 85 Hz
Focus adjustment
Electronic
Zoom adjustment
Electronic (approx. 1 : 1.5)
Lens shift
Manual (Approx. 100% of upwards maximum, approx. 50% of downwards
maximum, approx. 50% sideways maximum)
Lamp (light source)
UHE lamp, 200 W, Model No.: ELPLP28
Power supply
100–240VAC 50/60Hz 3.0 – 1.4A
Power Consumption
Operating : 270 W(100 to 120 V area), 260 W(200 to 240 V area)
Standby : 0.3 W(100 to 120 V area), 0.5 W(200 to 240 V area)
Operating
temperature
+5° – +35°C (No condensation)
Storage temperature
-10° – +60°C (No condensation)
Weight
Approx. 5.3 kg
Ports
D4 1 D4
InputA 1 RCA pin jack × 4
InputB 1 Mini D-Sub 15-pin (female) blue
Video 1 RCA pin jack
S-Video 1 Mini DIN 4-pin
Control (RS-232C) 1 D-Sub 9-pin (male)
USB * 1 USB connector (type B)
Trigger out 1 3.5 mm mini jack
Pixelworks DNX
TM
ICs are used in this Projector.

Table of Contents

Other manuals for Epson dreamio EMP-TW200H

Related product manuals