40
8. Adjust the edge guides to fit the edges of the original so that there are no gaps. Otherwise, the
original may skew.
If the document extends beyond the input tray extension, support the original as it enters into and ejects
from the product to prevent it from skewing. When scanning thin originals or originals that tend to curl
after scanning, we recommend extending the input and output tray paper supports. After loading the
original, press both of the buttons to raise the supports.
Parent topic: Loading Originals
Related references
Original Document Specifications
Plastic and Laminated Card Specifications
Special Original Specifications
To Next Page
Loading...
Need help?
General
