Epson EB-1430Wi - Adjusting the Position of the Image (Image Shift)

a
You can also make adjustments from the Configuration menu.
s Settings - Zoom p.178
Adjusting the Position of the Image (Image Shift)
You can fine tune the position of the image without moving the projector.
a
Perform Adjust Zoom or Keystone.
s "Adjusting the Image Size" p.61
s "Correcting Keystone Distortion" p.59
The Image Shift screen is displayed after you have made adjustments.
b
Adjust the position of the projected image.
Using Remote Control Using the Control Panel
You can shift the image diagonally by pressing any pair of adjacent
[
], [ ], [ ], and [ ] buttons, or a combination
of [
w], [v], [Wide], and [Tele] buttons.
c
Press the [Esc] button to close the adjustment screen.
The adjustment screen disappears if no operation is performed after
approximately 10 seconds.
Adjusting Projected Images
62