Epson EB-1460Ui - When Two or more Projectors Are Installed in Parallel

Installation Guide
11
a
Installing the Touch Unit (s p.87)
b
Adjusting the Angle of Laser Diffusion (s p.91)
c
Performing Touch Calibration (s p.84)
When two or more projectors are installed in parallel
When using the multi-projection function (when multiple projectors are installed in parallel to project one,
large screen), follow the steps below.
a
Installing the Setting Plate and the Projector (s p.32)
b
Adjusting the Position of the Projector (s p.46)
c
Setting the Projector ID (s p.95)
d
Adjusting the Image in Multi-Projection (s p.98)
When two projectors are installed in parallel and you want to use the interactive function, make the following
settings. Make the settings for each projector.
a
Setting Projector Synchronization (s p.100)
b
Setting Multi-Projection Interactive (s p.101)