Installation Guide
55
There are two methods available for calibrating the pen; Auto Calibration and Manual Calibration. When
calibrating the pen for the first time after installing the projector, perform Manual Calibration for optimum
calibration.
For the Auto Calibration method, see the projector's User's Guide (on the Document CD-ROM).
c
When two projectors are installed in parallel and you are using the interactive function, set the multi-
projection interactive features before adjusting the pen.
s
"When two projectors are installed in parallel and you are using the interactive function" p.99
a
Turn on the projector, and then press the [Menu] button
Using the Remote Control Using the Control Panel
b
Select Easy Interactive Function from Extended
c
Select Manual Calibration
To Next Page
Loading...
