Opera‐
tion
Combinations Descriptions
ID selected with remote
control: 1
Possible
Projector ID: Off When the Projector ID is set
to Off, you can operate the
projector regardless of the ID
selected with the remote
control.
ID selected with remote
control: 1
Possible
Projector ID: 1 When 0 is selected with the
remote control, you can
operate the projector from
the remote control regardless
of the Projector ID.
ID selected with remote
control: 0
Not possi‐
ble
Projector ID: 1 When the Projector ID and
the ID selected with the
remote control do not match,
you cannot operate the
projector from the remote
control.
ID selected with remote
control: 3
Setting the Projector ID
a
Press the [Menu] button while projecting.
s "Using the Configuration Menu" p.76
Control panel
b
Select Projector ID from Extended.
Projection Functions
66
To Next Page
Loading...
