Wired Network Projection
102
a
To highlight the numbers you want from the displayed keyboard,
press the arrow buttons on the remote control. To select a
highlighted number, press [Enter].
h
To prevent the IP address from being displayed on the LAN standby
screen and Home screen, set the IP Address Display setting to Off.
i
When you finish selecting settings, select Complete and follow the on-
screen instructions to save your settings and exit the menus.
j
Press the [LAN] button on the remote control.
The wired network settings complete when you see the correct IP
address on the LAN standby screen.
To Next Page
Loading...
