g
Use the [ ], [ ], [ ], and [ ] buttons to correct distortion.
To continue to correct another point, press the [Esc] button to
return to the previous screen, and then repeat steps 6 and 7.
a
Each time you press the [ ] button, you can show or hide the
image and the grid.
h
When you are done, press the [Menu] button to exit the correction
menu.
Selecting the Projection Quality (Selecting Color
Mode)
You can easily obtain the optimum image quality simply by selecting the
setting that best corresponds to your surroundings when projecting. The
brightness of the image varies depending on the mode selected.
Mode Application
Dynamic
Ideal for use in a bright room. This is the brightest
mode.
Presentation
Ideal for making presentations using color materials
in a bright room.
Theatre
Ideal for watching films in a dark room. Gives
images a natural tone.
Photo
*1
Ideal for projecting still pictures, such as photos, in
a bright room. The images are vivid and brought
into contrast.
Sports
*2
Ideal for watching TV programmes in a bright
room. The images are vivid and brought to life.
sRGB
Ideal for images that conform to the
sRGB
g
color
standard.
DICOM SIM
*1
Ideal for projecting X-ray photographs and other
medical images. This produces images with clear
shadows. The projector is not a medical device and
cannot be used for medical diagnosis.
Multi-Projection
Ideal for projecting from multiple projectors.
Minimize the color tone difference between each
projected image.
*1 This can only be selected when inputting RGB signals, or when LAN is
selected as the input source.
*2 This can only be selected when inputting component video signals, or when
the source is Video or S-Video.
Adjusting Projected Images
44
To Next Page
Loading...
Need help?
General
