Installation Guide
38
b
Change the aspect ratio of the projected image (only when necessary)
Project images from a connected device, and then press the [Aspect] button on the remote control.
Each time you press the button, the aspect name is displayed on the screen and the aspect ratio
changes.
Using the Remote Control
c
•
For details on connecting to devices and projecting images, see the Quick Start Guide.
•
The aspect ratio does not change when no images are being projected from the connected
device.
•
You can also change the aspect ratio from Signal - Aspect from the Configuration menu.
s
Projector's User's Guide - Configuration menu
c
Press the following buttons to display the guidance screen
•
Using the Remote Control
Press the [Help], and then press [
].
•
Using the Control Panel
Press the [Help], and then press the [Wide] button.
The guidance screen is displayed.
To Next Page
Loading...
