Epson EB-770Fi - Wall Mount Specifications

137 pages

To Next Page

To Previous Page

Installing the Wall mount

Wall Mount Specifications

Item Specification

Wall mount mass (setting plate, hexagonal axis, adjustment unit, wall plate,

wall plate cover, end cap)

Approx. 9.2 kg

Load capacity Approx. 15.0 kg

Main Page

Contents of this Guide2
About this Installation Guide3
About Replacement Installations3
Conditions for Replacement Installations3
Example Workflow for Replacement Installations5
Table of Contents6
Introduction8
Using the Product Safely8
Safety Indications8
Explanation of Symbols8
Package Contents9
Wall Mount9
Main Mount9
Accessories10
Touch Unit11
Touch Unit Bracket12
Pen Stand12
Necessary Items12
Installation Work Flow14
Figures of Installation Dimensions15
When Installing Multiple Projectors Nearby16
When Installing Multiple Touch Units Nearby17
Cautions on Installing the Wall Mount18
Cautions on the Installation Location of the Wall Mount21
Wall Mount Specifications23
External Dimensions24
Adjustment Range27
Vertical Slide27
Horizontal Slide27
Forward/Backward Slide28
Mini PC Installation Plate29
Installing Accessories29
Mount29
Attaching the Mount31
Determining the Installation Position (Projection Distance Tables)31
Attaching the Adjustment Unit to the Projector47
Install the Wall Plate on the Wall48
Attaching the Setting Plate to the Wall Plate50
Attaching the Adjustment Unit to the Setting Plate55
Attaching Peripheral Devices56
Adjusting the Position of the Projected Image59
Preparations before Adjusting60
Auto Screen Adjustment62
Performing Mechanical Adjustment Using the Setting Plate Installation Guide66
Adjusting Using the Projector Menus69
Attaching the Covers75
Attaching a Security Cable76
Installing the Pen Stand78
Notes on the Pen Stand78
Pen Stand Specifications79
External Dimensions79
Installing the Pen Stand80
When Securing with Magnets80
When Securing with Screws81
Adjusting the Interactive Pen83
Calibrating the Interactive Pen83
Manual Calibration83
Auto Calibration85
Installing the Touch Unit87
Notes on Handling the Touch Unit87
For Canadian Users88
Touch Unit Installation Location89
Notes on the Touch Unit Bracket90
Notes on the Laser91
Attached Labels91
Laser Diffusion Port91
Touch Unit Specifications93
External Dimensions93
Touch Unit Bracket Specifications94
External Dimensions94
Adjustment Range95
Unit96
Installing the Touch Unit97
Installing the Infrared Deflectors97
Installing the Touch Unit98
When Installing on the Projection Surface Without Using the Touch Unit Bracket98
When Using the Touch Unit Bracket to Install Outside of the Projection Surface101
Attaching a Security Cable105
Turning on the Touch Unit106
Adjusting the Angle of the Laser (Touch Unit Auto Setup)107
When Auto Adjustment Fails112
Calibrating the Touch Operation Position121
Setting the Projector124
Batch Setup Function124
Setup Using a USB Flash Drive124
Saving Settings to the USB Flash Drive124
Copying Saved Settings to Other Projectors126
Setup by Connecting the Computer and Projector with a USB Cable127
Saving Settings to a Computer127
Copying Saved Settings to Other Projectors128
When Setup Fails129
Installing Multiple Projectors130
Projection)130
Setting the Projector ID130
Adjusting the Image in Multi-Projection132
When Using the EB-770Fi132
When Using the EB-760Wi133
List of Safety Symbols134
General Notice137

Epson EB-770Fi - Wall Mount Specifications

Table of Contents

Other manuals for Epson EB-770Fi

Related product manuals